Sat - Thu 9.00 AM - 6.00 PM
End Plug 110mm Jack Mount
End Plug 110mm Jack Mount
Heavy-Duty Duct Closure & Sealing Plug for Telecom, Fiber & Underground Utilities in Saudi Arabia & Gulf Region
Why the End Plug 110mm Jack Mount Is Important
The exposure of open conduit to the air and the environment makes the systems prone to:
- Water and moisture entry
- Soil, sand, and debris infiltration
- Rodent and insect ingress
- Cable damage during installation
- Oxidation and corrosion
- Installation delays and rework
However, installing a good quality end plug right after trenching, drilling, or jack mounting not only secures against these dangers but also guarantees that cable installation, fiber pulling, and network integrity go on without a hitch.
Key Features of End Plug 110mm Jack Mount
- Precision designed for 110mm duct inner diameter
- Durable and impact-proof made up
- Protected from weather, dust, and moisture
- Simple push-fit or lock-in installation
- Fits jack mount and pulled duct installations
- Applicable for permanent and temporary sealing
- Based on variant, either reusable or single use
- Tolerant to soil chemicals and environmental stress
Technical Specifications – End Plug 110mm Jack Mount
| Specification | Detail |
|---|---|
| Product Name | End Plug 110mm Jack Mount |
| Compatible Duct Size | 110 mm diameter |
| Material | HDPE / Polypropylene / Rubber EPDM |
| Color | Black / Natural |
| Installation Type | Push-fit / Mechanical locking |
| Operating Temp | -20°C to +80°C (material dependent) |
| Moisture Resistance | Excellent |
| UV Resistance | Yes |
| Chemical Resistance | Good (soil salinity, mild chemicals) |
| Reusability | Yes (depending on design) |
| Application | Telecom, fiber, power, utilities |
Materials & Construction
The End Plug 110mm Jack Mount is usually made of the durable and high-impact polymer plastics such as:
- HDPE (High-Density Polyethylene)
- grate resistance to moisture
- toughness under pressure
- very long lifetime
- Polypropylene (PP)
- fairly good structural integrity
- toughness against chemicals
- Elastomeric / Rubber (EPDM) Seals
- better sealing efficiency
- compression fit for impermeable closure
These are the materials chosen for the reason that they could resist tough, buried conditions along with temperature changes, chemical in soil, and mechanical impact.
How End Plug 110mm Jack Mount Is Used
Typical Installation Steps
Prepare the Duct End
Ensure the 110mm duct end is clean and smooth.Inspect the Plug
Check that the plug matches the duct diameter and inspect for any defects.Insert the Plug
Align the plug and press it into the duct until it is fully seated. Push-fit or locking mechanisms will secure it in place.Verify the Seal
Confirm that the plug sits flush and creates a snug, sealed interface.Backfill and Compact
After sealing, backfill the trench or hole per project specifications.Re-Entry (If Required)
Some plug designs allow for removal prior to cable pulling and then reseating after installation.
Applications – Where End Plug 110mm Jack Mount Is Used
Telecom & Fiber Optic Networks
Essential for sealing ducts during fiber deployment, especially in FTTH, FTTx, and backbone fiber networks.
Underground Power Ducts
Used to protect power cable conduits before and after pulling.
Utility Corridors
Provides organization and protection in shared utility trenches.
Directional Drilling & Trenchless Installations
Commonly used in jack and bore methods to seal entry or exit pits.
Industrial & Data Center Infrastructure
Seals cable access points for industrial control and communications lines.
Smart City Deployments
Secures conduit ends in sensor networks, urban networks, and digital utility grids
Benefits of Using End Plug 110mm Jack Mount
1. Effective Environmental Protection
Seals conduits against intrusion of water, dust, sand, rust, rodents, and insects.
2. Maintenance of Cable Pathway Cleanliness
Facilitates smooth cable pulling operations by ensuring ducts are always clear.
3. Enhanced Installation Efficiency
Eliminates rework caused by duct contamination.
4. Long-Term Infrastructure Reliability
Increases the durability and functionality of underground systems.
5. Reduced Operational Costs
Decreases repair, downtime, and maintenance costs of cables.
6. Simple, Tool-Free Installation
Push-fit variations are time and labor efficient.
Types and Variants
Push-Fit End Plugs
Fast and tool-free mounting - perfect for the temporary and permanent installation.
Mechanical Locking End Plugs
Provide extra safety with a twist or lock mechanism that will keep the plug secured and prevent accidental removal.
Removable Designs
Facilitate smooth re-access for cable pulls and network upgrades.
Permanent Seals
Suggested in areas where no future access is foreseen.
Comparison: End Plug 110mm Jack Mount vs Standard Duct End Plug
| Feature | End Plug 110mm Jack Mount | Standard End Plug |
|---|---|---|
| Installation | Designed for jack mount and trenchless | General use |
| Locking Mechanism | Often includes mechanical lock | Basic push fit |
| Re-entry | Removable options available | Varies |
| Best For | Telecom & fiber | Smaller or general ducts |
| Environmental Seal | High | Moderate to high |
Installation Best Practices
Clean the duct end thoroughly before installation
Ensure correct and full seating of the plug
Verify plug size matches exactly 110mm inner diameter
Use lubrication only if manufacturer recommends
Record plug placement for project documentation
Maintenance and Longevity
The End Plug 110mm Jack Mount, once installed, usually does not need any maintenance at all. It is made of materials that are very durable, even when buried, and that can withstand the moisture and temperature changes that are common in the Gulf Region.
Environmental Suitability for KSA & Gulf Region
The Gulf region has the following characteristics:
- Extremely hot
- Deserts with very low rainfall
- Salted coastal soils
- A lot of sand and dust
The End Plug 110mm Jack Mount is specially designed to last in these conditions thanks to its use of UV-stable polymers, its moisture resistance, and its tolerance for chemicals. Thus, it is perfectly suited for the harsh environments of Saudi Arabia, UAE, Qatar, Kuwait, Bahrain, and Oman.
Compliance and Quality Assurance
While there might not be a single universal standard applied all the time, the End Plug 110mm Jack Mount is generally produced according to:
- ISO quality control systems
- ASTM property performance standards
- Telecom and utility project requirements
- Local city and infrastructure authority regulations
For compliance checking, it is always imperative to demand from your supplier material certificates, test reports, and conformity documents.
Handling and storage
Store in a dry, cool location
Avoid direct sunlight before installation
Stack plugs without crushing
Inspect visually before use
Buyer’s Guide: Choosing the Right End Plug 110mm Jack Mount
When selecting a jack mount end plug, consider:
1. Material Quality
Choose HDPE or elastomer variant based on environment.
2. Seal Type
Compression or integrated gasket for moisture exclusion.
3. Installation Method
Push-fit vs mechanical lock as per project needs.
4. Re-entry vs Permanent
Removable options for future access.
5. Environmental Conditions
UV, moisture, soil chemicals.
6. Supplier Credentials
Quality control certifications and warranty support.
Conclusion
The End Plug 110mm Jack Mount is a critical sealing component for protecting underground conduits in modern infrastructure deployments across Saudi Arabia and the Gulf region. Its reliable sealing capability, strong mechanical design, and compatibility with telecom, fiber, power, and utility systems make it indispensable in duct management and protection.
From pre-installation protection through cable pulling stages to long-term network operation, this end plug helps maintain duct cleanliness, enhance cable installation efficiency, prevent costly damage, and increase long-term service reliability. In harsh Gulf climatic and soil conditions, its durability and environmental resistance make it a trusted choice for contractors, engineers, and utility planners working on projects of all scales.
Frequently Asked Questions (FAQs)
1. What is an End Plug 110mm Jack Mount used for?
It seals the open end of a 110mm duct to protect against water, dust, rodents, and debris.
2. Can it be reused after cable installation?
Many designs are removable and reusable.
3. Does it require tools for installation?
Push-fit variants do not; some locking models may use basic tools.
4. Is the seal moisture-proof?
Yes, compression and elastomer designs provide moisture resistance.
5. Is it suitable for fiber optic projects?
Absolutely — it protects conduits prior to fiber blowing or cable pulling.
6. Can it be used in directional drilling installations?
Yes, it works well with jack mount and trenchless bore entries.
7. Does it resist Gulf climate conditions?
Yes — engineered for high temperatures, sand, dust, and moisture.
8. Is it approved for government projects in KSA?
When supplied with correct specs and certificates, yes.
9. Can the plug block rodent entry?
Yes — it acts as a physical barrier to pests.
10. Does it affect cable pulling operations?
No — once removed, the duct remains clean and ready for cable pulls.