Sat - Thu 9.00 AM - 6.00 PM
110mm HDPE Corrugated Duct with 3 Sub-Ducts (42mm OD) | Fiber Optic & Telecom Conduit in Saudi Arabia
HDPE Corrugated Duct 110 mm OD with 3 Sub-Ducts (42 mm OD)
Durable Multi-Cable Solution for KSA & Gulf
Key Features
- Multi-Cable Support – The installation of three sub-ducts gives the flexibility of separate routes for the different cables.
- Durable HDPE Material – It's not affected by hit, soil pressure, and climatic factors.
- Flexible Design – Bending around obstacles without damaging is made easy with the corrugated structure.
- UV & Chemical Resistant – The product assures its usability in outside areas from desert to humid climates.
- Lightweight & Easy to Install – Labor and transport efforts will be reduced.
- Smooth Sub-Duct Interiors – There will be zero friction while pulling cables.
- Long Lifespan – Performance has been dependable for several decades even under harsh conditions.
Technical Specifications
| Parameter | Specification |
|---|---|
| Material | High-Density Polyethylene (HDPE) |
| Outer Diameter (OD) | 110 mm |
| Inner Diameter (ID) | Approx. 100 mm |
| Sub-Ducts | 3 sub-ducts, each 42 mm OD |
| Wall Thickness | 5–6 mm (outer duct) |
| Temperature Range | -40°C to +60°C |
| UV Resistance | Yes |
| Color | Black (outer duct), optional colored sub-ducts |
| Flexibility | High |
| Pressure Rating | Medium to high |
| Standard Lengths | 6 m, 12 m, or coil lengths up to 100 m |
| Applications | Electrical, telecom, fibre-optic, industrial |
| Compliance | GCC and international standards |
Applications in KSA & Gulf Region
1. Telecommunication Networks
Fiber optic backbone wiring, telephone and data networks, FTTH and FTTx programs
2. Electrical Installations
Power cable routing underground, industrial wiring in the factory, power systems in smart buildings
3. Industrial Applications
Factory control and automation systems, wiring for chemical and oil & gas plants, cabling for high-density industries
4. Infrastructure Projects
Installation of cables for roads, highways, and metro lines, public lighting and traffic management systems, utility networks for smart cities
5. Renewable Energy Installations
Routing of cables for solar panels and inverters, solar farms for rooftop and ground-mounted installations
Advantages of HDPE Corrugated Duct with 3 Sub-Ducts
Efficient Multi-Cable Management – Three sub-ducts allow organized installation and future expansion.
Strong & Durable – Corrugated HDPE resists impact, soil pressure, and environmental stress.
Flexible – Easily navigates corners and bends.
UV & Chemical Resistant – Performs reliably in harsh outdoor environments.
Lightweight & Easy to Handle – Simplifies installation and reduces labor costs.
Cost-Effective – Combines multiple cable runs in a single duct system.
Future-Proof Design – Sub-ducts allow easy replacement or addition of cables without disturbing existing lines.
Installation Guidelines
- Route Planning – Mark out the bends, jumbles, and the points where cable enters/exits.
- Maintain Bending Radius – Do not stress ducts and avoid using sharp bends.
- Anchor Properly – Secure the duct with clamps and provide support to make it stable.
- Inspect Sub-Ducts – Check that they have no dirt and other particles in them so that the cable can be pulled easily.
- Seal Ends – Prevent the entry of moisture, sand, and dust.
- Use Lubricants if Necessary – Reduce the effort required to pull cables through multiple sub-ducts.
- Careful Backfilling – Ensure that the duct is not damaged by sharp materials during the underground installation.
Conclusion
The HDPE Corrugated Duct 110 mm OD with 3 Sub-Ducts (42 mm OD each) is an efficient and flexible solution for electricity, telecom, and fibre-optic networks in KSA and the Gulf countries. The combination of the sturdy and enduring HDPE material, the rippled design, and the sub-ducts accommodates the cable installations to be secured, neat, and updated. The duct offers a route that is very effective for cables, thus reducing the frequency of maintenance and being in compliance with the standards of the GCC for engineers, contractors, and project managers; therefore, it is highly suitable for the mentioned applications.
Frequently Asked Questions (FAQs)
What is HDPE 110 mm duct with 3 sub-ducts used for?
For multi-cable installations including fibre-optic, electrical, telecom, and industrial wiring.What is the size of the sub-ducts?
Each sub-duct has a 42 mm OD, suitable for multiple cable runs.Is it suitable for outdoor Gulf climates?
Yes, HDPE is UV and chemical-resistant, ideal for desert conditions.Can it be buried underground?
Yes, designed to handle high soil pressure and mechanical load.Can cables be replaced individually?
Yes, sub-ducts allow cable replacement without affecting other lines.What lengths are available?
6 m, 12 m, or coil lengths up to 100 m.Is it suitable for fibre-optic cables?
Yes, smooth sub-duct interiors reduce friction and cable damage.Is it GCC compliant?
Yes, designed according to GCC electrical and telecom standards.How flexible is the duct?
Highly flexible for bends and curves.Is installation easy?
Yes, lightweight and sub-duct design simplify installation.
HDPE Corrugated Duct 110MM OD with 3 Sub-Ducts 42MM OD— Premium Suppliers, Manufacturers & Delivery
The 110MM HDPE Corrugated Duct Tube with Three Sub-Ducts 42MM OD is meant for FTTx networks with medium capacity, underground telecoms infra-structuring, and multiple cable electrical infra-structuring. The tube’s corrugated configuration creates a tube structure with superior crush resistance and flexibility and three sub duct ports to assist in managing multiple fiber installations/route installations more effectively.
Benefits to Selecting Saudi Ducts Suppliers:
- Easy access to certified HDPE manufacturers in the KSA and GCC
- All products managed and produced in compliance with international telecom and electrical product standards
- Reliable logistics, delivery, and bulk purchasing methodologies to assist with fiber deployment
- Direct management with suppliers for quotes/orders, communications with suppliers
HDPE 110MM 3 Sub-Ducts vs Standard Corrugated Duct & Best Practices
Comparison Table – HDPE 110MM 3 Sub-Ducts vs Standard 110MM Corrugated Duct
| Feature | HDPE 110MM OD with 3 Sub-Ducts 42MM OD | Standard HDPE 110MM Corrugated Duct |
|---|---|---|
| Sub-Ducts | 3 integrated for multi-fiber deployment | None |
| Flexibility | High | High |
| Resistance to Crushing | Excellent | Excellent |
| Cost Efficiency | Slightly higher | Competitive |
| Typical Application | FTTx multi-fiber networks, telecom backbone | Single cable telecom & electrical networks |
Best Practices for Installing HDPE 110MM with 3 Sub-Ducts:
Maintain trench depth of 1.2–1.5 meters for urban or high-traffic areas
Use sand bedding & protective backfill to prevent duct deformation
Ensure proper alignment and spacing for multi-fiber cable management
Avoid sharp bends to maintain sub-duct integrity
Seal duct ends to prevent water and soil ingress
Clearly label each sub-duct for easy maintenance and future expansions