Sat - Thu 9.00 AM - 6.00 PM
Send Inquiry

End Cap HDPE – Thread type 20MM

Saudi Ducts > End Cap HDPE – Thread type 20MM

HDPE Threaded End Cap 20mm

 Secure Pipe Sealing Solution for Telecom & Utility Ducting (KSA & Gulf)

The End Cap HDPE – Thread Type 20MM is an accessory that is very strong and sealing the purpose of which to be used in telecoms, electrical, and utility networks sealing and protecting the open ends of HDPE ducts, microducts, and conduit pipes. The manufacturer uses only the best high-density polyethylene in the production of this threaded end cap which thus ensures a sealing that is dependable, airtight, and waterproof and so no moisture, dust, insects, sand, and environmental factors can access the cables and ducts. The abovementioned factors are however very crucial when it comes to the KSA and Gulf region’s unfavorable climates.

Its universal 20mm threaded design allows it to be applied smoothly on 20mm ducts making it an ideal candidate for fiber optic systems, microduct deployments, cable protection networks, and underground conduit installations. This sturdy and resilient HDPE end cap will provide you with the reliability, less maintenance, and the good performance that you have been expecting for both new installations and network protection.

The HDPE Threaded End Cap 20mm is engineered to seal the terminal end of ducts and prevent infiltration of sediments or moisture, which can compromise fiber optic cables and communication systems. The threaded locking mechanism provides a firm grip and ensures that the cap does not loosen due to vibration, pressure, or external impact.

Built from PE material with excellent environmental resistance, the end cap performs reliably in desert, coastal, and industrial environments. It is lightweight, recyclable, and easy to install without special tools—making it a preferred ducting accessory across telecom operators, contractors, and utility service providers in the Middle East.

The End Cap HDPE – Thread Type 20MM is an accessory that is very strong and sealing the purpose of which to be used in telecoms, electrical, and utility networks sealing and protecting the open ends of HDPE ducts, microducts, and conduit pipes. The manufacturer uses only the best high-density polyethylene in the production of this threaded end cap which thus ensures a sealing that is dependable, airtight, and waterproof and so no moisture, dust, insects, sand, and environmental factors can access the cables and ducts. The abovementioned factors are however very crucial when it comes to the KSA and Gulf region’s unfavorable climates.

Its universal 20mm threaded design allows it to be applied smoothly on 20mm ducts making it an ideal candidate for fiber optic systems, microduct deployments, cable protection networks, and underground conduit installations. This sturdy and resilient HDPE end cap will provide you with the reliability, less maintenance, and the good performance that you have been expecting for both new installations and network protection.

The HDPE Threaded End Cap 20mm is engineered to seal the terminal end of ducts and prevent infiltration of sediments or moisture, which can compromise fiber optic cables and communication systems. The threaded locking mechanism provides a firm grip and ensures that the cap does not loosen due to vibration, pressure, or external impact.

Built from PE material with excellent environmental resistance, the end cap performs reliably in desert, coastal, and industrial environments. It is lightweight, recyclable, and easy to install without special tools—making it a preferred ducting accessory across telecom operators, contractors, and utility service providers in the Middle East.

Explore Full Product Details
image

Key Features

  • Thread-type locking mechanism provides a secure fit
  • Extreme climate conditions are no match for the durable HDPE material
  • Corrosion and chemicals have no effect on the product
  • It is completely waterproof as well as dustproof
  • Ducts are protected against sand, insects, moisture, and debris
  • Installation and removal are very simple
  • It has a universal compatibility of 20mm
  • The product is lightweight but still very strong
  • It is UV resistant so it can be installed outdoors
  • The product lasts long and requires very little maintenance

Technical Specifications

ParameterDetails
Product NameHDPE – Thread Type End Cap
Size20mm
MaterialHigh-Density Polyethylene (HDPE)
TypeThreaded
ColorBlack / Standard
UV ResistantYes
Weather ResistantYes
ApplicationTelecom ducts, microducts, conduit pipes
DurabilityHigh impact and wear resistance
Seal TypeMechanical locking with threaded grip
Temperature Resistance-20°C to +80°C
InstallationManual tightening, no tools required

Where It Is Used

The 20mm HDPE Thread-Type End Cap is popularly used in:

✔ Telecom duct sealing

The Fiber optic cable routes are made secure.

✔ Microduct & mini-duct closures

It is utilized in FTTx, FTTH, and last-mile connections.

✔ Underground conduit sealing

Contamination and blockages are stopped.

✔ Electrical cable protection

Unused or spare conduits are sealed.

✔ Data center cabling

Cable pathways are kept dust-free.

✔ Industrial cable management

Chemical plants, factories, and processing units are some of the users.

✔ Outdoor installations

It can be used in high-temperature desert environments of KSA, UAE, Oman & Qatar.

Benefits

  • Extends the life of ducts by preventing moisture entry

  • Prevents fiber optic cable damage

  • Reduces maintenance downtime

  • Ensures dust-free cable routes

  • Increases installation safety

  • Cost-effective and long-lasting

  • Provides strong end protection especially in harsh climates

HOW IT IS USED (Step-by-Step)

1. The duct must be primed

Scrutinize the duct openings and ensure that they are entirely free of any impurities or defects.

2. The threaded cap must be positioned correctly

Place the thread cap over the duct aperture.

3. The locking action is executed by rotation

Rotate the end cap clockwise until it becomes very tight.

4. The seal is to be judged

Check the cap for tightness and no gaps.

5. The pressure or airflow test is to be carried out

For telecom ducts, check that no airflow is coming from the sealed end.

6. Inspection should be done every so often

An inspection done every so often will guarantee the cap is still present and has not been displaced by soil pressure or other environmental factors.

Conclusion

The HDPE Thread-Type End Cap 20mm is a small but essential part that has the primary function of protecting ducts and keeping the telecom and utility networks intact. The product is extraordinarily strong and resistant to many factors due to the combination of its features like durability, resistance to corrosion, and sealing that prevents weather from getting through. Such a product is indeed perfect for KSA and Gulf region's harsh hot environments. The end cap is a piece of equipment that is easy to install, very trustworthy, requires little maintenance, and has low operational risks while protecting the areas of valuable fiber optic and electrical cable infrastructure.

Frequently Asked Questions (FAQs)

1. What is the purpose of a 20mm HDPE threaded end cap?

It seals the open ends of ducts and prevents debris, moisture, and dust from entering.

2. Can this end cap be used for telecom ducts?

Yes, it is widely used in fiber optic and microduct systems.

3. Is the HDPE material durable?

Yes, it is impact-resistant and suitable for harsh climates.

4. Does it require tools for installation?

No, it can be installed manually by tightening the threads.

5. Is it waterproof?

Yes, it provides an effective waterproof seal.

6. Can it withstand Gulf temperatures?

Absolutely—HDPE is heat-resistant and UV-stabilized.

7. Is it reusable?

Yes, it can be removed and reused if needed.

8. Does it protect against insects and sand?

Yes, its sealed design prevents intrusion.

9. What size ducts does it fit?

It fits standard 20mm threaded ducts and microducts.

10. Is it suitable for underground installation?

Yes, it is ideal for underground, outdoor, and industrial environments.