Sat - Thu 9.00 AM - 6.00 PM
HDPE PE100 Main Duct Full Black 160 mm – PN 10
HDPE PE100 Main-Duct Full Black 160 mm
High-Pressure HDPE Pipe for Telecom & Utility Networks (KSA & Gulf)
Key Specifications (Technical Details)
| Parameter | Details |
|---|---|
| Product Type | HDPE PE100 Main-Duct |
| Outer Diameter | 160 mm |
| Material Grade | PE100 High-Density Polyethylene |
| Pressure Rating | PN 10 (10 Bar) |
| Color | Full Black (UV Stabilized) |
| Standard | ISO 4427 / EN 12201 / SASO / GCC Telecom Standards |
| Length Options | 50m, 100m, 200m coils or 6m/12m straight lengths |
| Temperature Range | -20°C to +60°C |
| Jointing Method | Butt-Fusion / Electro-Fusion / Mechanical |
| UV Protection | Yes |
| Chemical Resistance | Excellent |
| Crack Resistance | High (Slow crack growth resistance) |
| Wall Thickness | SDR 17 or SDR 11 depending on PN10 compliance |
Features & Advantages
1. High Pressure Strength (PN 10)
The maximum operating pressure is 10 bar, thus it is suitable for the most demanding utility applications.
2. PE100 Premium Quality
This material is characterized by density and strength which are secret to its long life.
3. UV Stabilized Full Black Body
Not only it has been protected against the sun, but also it is perfect for the Gulf region.
4. Corrosion & Chemical Resistant
They oppose soil in terms of chemicals, moisture, saline conditions, and industrial and health impacts.
5. Excellent Flexibility
This means that the number of joints required will be less, which in turn means that the installation time and cost will be lower.
6. Long Service Life (50+ Years)
Above ground for a very long time, it was written like that!
7. Smooth Internal Bore
So, the cables will be very easy to pull or the fluids will flow with very little friction.
8. Leak-proof Joints
These joints are very strong and permanent ones that can be made using butt or electrofusion.
9. Lightweight & Easy Handling
Ducts are much easier to transport and install than metal or concrete ones.
Applications – Where It Is Used
Telecommunication Networks
Long-distance fiber-optic backbone routes
Inter-city telecom ducts
Metro fiber installations
Data center connectivity routes
Electrical & Power Cable Protection
HV/LV underground cable routes
Power grid expansion projects
Solar plant underground cabling
Substation-to-grid cable protection
Municipal & Infrastructure Works
Water conveyance systems
Irrigation networks
Drainage connections
Utility corridors
Industrial Projects
Oil & gas facilities
Petrochemical plants
Mining operations
Industrial cable protection ducts
Construction & Mega Projects
Smart cities
Airports
Highways
Rail corridors
Seaport utility lines
Why It Is Preferred in KSA & Gulf Region
✔ Withstands Extreme Heat (up to 60°C)
Perfect for GCC desert climate.
✔ Zero Corrosion
Ideal for saline soil and coastal conditions.
✔ High Durability for Mega Projects
Used in NEOM, Red Sea Project, Smart City developments, and telecom expansions.
✔ Easy & Fast Installation
Reduces project timelines significantly.
✔ Cost Effective Over Lifetime
Low maintenance + long lifespan = excellent ROI.
Conclusion
The HDPE PE100 Main-Duct Full Black 160 mm pipe is a modern, reliable, and robust ducting system for new underground and overground utility projects. It is manufactured from high-density polyethylene (PE100) which possesses all the positive properties that are needed for an extreme telecom, power, water, and utility networks case: strong mechanical properties, flexibility, and pressure-resistance.
The duct size of 160 mm permits a very efficient routing of the many cables or high-capacity services while the full black UV-stabilized construction means very high resistance to all kinds of bad effects like chemical, corrosion, and environmental stress cracking besides very good resistance to sunlight. The duct's surface that is smooth inside reduces even the friction caused by long distances thus increasing project efficiency and lowering installation costs due to easy cable installation.
In summary, the HDPE PE100 Main-Duct Full Black 160 mm can be seen as a very future-ready, cost-effective, and low maintenance solution that not only meets international quality standards but also performs reliably under extreme climatic conditions thus being the best choice for large-scale infrastructure projects in KSA, the Gulf region, and other parts of the world.
Frequently Asked Questions (FAQs)
1. What is HDPE PE100 Main-Duct 160 mm PN 10 used for?
It is used for telecom, power cable protection, water lines, and utility infrastructure.
2. Is the 160mm duct suitable for outdoor installations?
Yes, its full-black UV-stabilized design makes it ideal for outdoor and buried use.
3. What is the pressure rating of this duct?
It is rated PN 10, meaning it can handle 10 bar pressure.
4. What material is used in manufacturing?
High-density PE100 polyethylene.
5. Does it resist corrosion?
Yes, it is 100% corrosion and chemical resistant.
6. Can it be used for fiber optic cable routes?
Absolutely—commonly used for backbone and long-distance fiber projects.
7. What jointing methods are supported?
Butt-fusion, electrofusion, and mechanical couplers.
8. Is it approved for GCC infrastructure standards?
Yes, it complies with common Gulf telecom and utility standards.
9. What is the lifespan of HDPE PE100 ducts?
More than 50 years under normal conditions.
10. Is the duct flexible?
Yes, it offers excellent flexibility compared to rigid PVC or metal pipes.
HDPE PE100 Main Duct 160 mm PN10-Premium Supply, Certified Manufacturing & Delivery
The 160 mm PN10 HDPE (high-density polyethylene) PE100 pipe is designed specifically for telecommunications and utility infrastructure above-ground and underground in the Kingdom of Saudi Arabia and GCC. The pipe is manufactured from PE100 resin; has excellent pressure characteristics; is resistant to corrosion; can be used belowground throughout the KSA and GCC; and has a longer-than-average life cycle.
✔ Why Typical EPC/Telecom Contractors Use this Pipe?
- Strong material properties (PE100) contribute to a long-term reliable network that can withstand many repeat cycles.
- Internal pipe surface texture allows for smooth cabling insertion (blowing).
- PN10 pressure rating (used in utility applications).
- Pipe is Anti-UV (Ultraviolet) and Anti-Corrosive coated.
- Pipe is suitable for using fusion joining techniques.
HDPE PE100 Main Duct 160 mm PN10-Technical Comparison + Best Practices
HDPE PE100 Main Duct 160 mm PN10 vs PVC Duct
| Feature | HDPE PE100 160 mm PN10 | PVC Duct |
|---|---|---|
| Material | Flexible PE100 polyethylene | Rigid PVC |
| Pressure Capability | PN10 rated | Limited pressure tolerance |
| Durability | High impact resistance | Moderate |
| Installation | Fusion joint compatible | Solvent jointing |
| Best Application | Telecom backbone & utilities | Electrical conduit networks |
Best Installation Practices
1. Route Preparation
A trench or a duct corridor is made according to the project's requirements.
2. Pipe Laying
The HDPE 160mm duct comes out either by coils or straight lengths through rollers or machines.
3. Jointing Methods
- Butt Fusion Welding (the most common method)
- Electrofusion Couplers
- Compression coupling (temporary connections)
4. Cable Insertion/Pipeline Use
- Fiber cables are either blown into the duct with blowing machines or pulled through the duct.
- Jointing in power/water applications ensures smooth flow.
5. Sand Bedding & Backfilling
During the entire use, mechanical protection is provided.
6. Final Testing
The tests conducted are pressure testing, mandrel testing, or CCTV duct inspection.