Sat - Thu 9.00 AM - 6.00 PM
Mar Tile Grout
Mar Tile Grout
Markhor Tile Grout
Technical Data Sheet
1. Product Overview
Mar Tile Grout by Saudi Markhor Industrial Company is a high-quality, cementbased grout designed for filling joints between ceramic tiles, natural stones, and mosaics. It is suitable for interior and exterior applications on walls and floors. The product offers superior bonding, flexibility, and water resistance.
2. Technical Specifications
| Property | Value |
|---|---|
| Packaging Size | 10 kg bag |
| Available Colors | 18 standard colors |
| Mixing Ratio | 1.25 liters of water per 10 kg bag |
| Pot Life | Up to 12 hours |
| Application Temperature | +5°C to +35°C |
| Recommended Joint Width | Up to 5 mm |
| Shelf Life | 12 months in original sealed packaging |
3. Features and Benefits
• Excellent adhesion to tile edges
• Water and mold resistant
• Smooth finish and uniform color
• Easy to mix and apply
• Suitable for both wall and floor joints
4. Application Guidelines
1. Ensure tile joints are clean, dry, and free of dust or adhesive residues.
2. Add grout to clean water and mix to a lump-free consistency.
3. Let the mixture rest for 2-3 minutes and re-mix before use.
4. Apply grout using a rubber float, pressing firmly into joints.
5. After 10-15 minutes, clean surface with a damp sponge in a circular motion.
6. Polish tiles with a dry cloth once the grout is set.
5. Coverage (Approximate)
| Tile Size (cm) | Coverage per 10 kg Bag |
|---|---|
| 20 × 20 × 0.5 cm | Approximately 40 – 45 m² |
| 30 × 30 × 0.5 cm | Approximately 55 – 60 m² |
| 60 × 60 × 0.5 cm | Approximately 70 – 75 m² |
6. Safety Precautions
• Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water.
• Use gloves, goggles, and a dust mask during mixing and application.
• Keep out of reach of children.
• Refer to the product’s Safety Data Sheet (SDS) for detailed information.
7. Disclaimer
This technical data sheet is provided for guidance only. Actual product performance may vary due to application methods and environmental conditions. Always test the product for suitability before use.
8. Color Range
Mar Tile Grout is available in 18 aesthetically pleasing colors, designed to match or contrast with a wide range of tiles. The color range ensures a perfect finish for any tiling project, enhancing visual appeal.
9. Storage and Handling
Mar Tile Grout should be stored in a cool, dry place, away from direct sunlight and moisture. The product must be kept in its original, unopened packaging. Under proper storage conditions, it has a shelf life of 12 months.
10. Compliance and Standards
• ISO 9001 : 2015 Compliant
• Our operations comply with the QFS-certified quality management system.
Saudi Markhor Industrial Company 059 110 9392 www.markhorsa.com
Material Safety Data Sheet
1. Product and Company Identification
- Product Name: Mar Tile Grout
- Product Type: Cement-based Colored
- Grout Packaging: 10 kg bag
- Available Colors: 18 colors
- Manufacturer: Saudi Markhor Industrial
- Company Address: Exit 12 Al Kharj Road, Riyadh
- Phone: 059 110 9392
- Email: markhorsa@gmail.com 35
2. Composition / Information on Ingredients
- Portland Cement: 40-60%
- Silica Sand: 30-50%
- Pigments (Iron Oxides, Titanium Dioxide): 1-5%
- Additives: < 5%
3. Hazards Identification
- Eye Contact: Causes serious eye irritation.
- Skin Contact: May cause skin irritation.
- Inhalation: Dust may cause respiratory irritation.
- Ingestion: May be harmful if swallowed.
4. First Aid Measures
- Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
- Skin Contact: Wash with plenty of soap and water. If skin irritation occurs, get medical advice.
- Inhalation: Move person to fresh air. Seek medical attention if symptoms persist.
- Ingestion: Rinse mouth. Do NOT induce vomiting. Seek medical advice.
5. Fire Fighting Measures
- Suitable Extinguishing Media: Not flammable. Use extinguishing media suitable for surrounding fire.
- Special Hazards: None known.
- Protective Equipment: Firefighters should wear appropriate protective equipment.
6. Accidental Release Measures
- Avoid dust formation. Sweep up and shovel into suitable containers for disposal.
- Use appropriate personal protective equipment.
7. Handling and Storage
- Handling: Avoid contact with skin, eyes, and clothing. Avoid breathing dust.
- Storage: Store in a cool, dry, well-ventilated area in sealed containers.
8. Exposure Controls / Personal Protection
- Eye Protection: Safety goggles.
- Skin Protection: Protective gloves and clothing.
- Respiratory Protection: Dust mask or respirator.
- General: Wash hands after handling.
9. Physical and Chemical Properties
- Appearance: Powder (various colors)
- Odor: Odorless
- pH: 12 (wet mix)
- Boiling Point: Not applicable
- Flash Point: Not applicable
- Solubility: Partially soluble in water
10. Stability and Reactivity
- Stability: Stable under normal conditions.
- Conditions to Avoid: Moisture during storage.
- Incompatible Materials: Strong acids.
- Hazardous Decomposition Products: None known.
11. Toxicological Information
- May cause irritation to eyes, skin, and respiratory tract.
- Prolonged exposure may cause chronic effects.
12. Ecological Information
- Not classified as environmentally hazardous.
- Avoid release into the environment.
13. Disposal Considerations
• Dispose of contents/container in accordance with local/regional/national/international regulations.
14. Transport Information
- Not classified as dangerous for transport.
15. Regulatory Information
- Follow all applicable local, national, and international regulations
Method Statement
1. Product Information
- Product Name: Mar Tile Grout
- Type: Cementitious
- Colored Grout (Available
in 18 Colors) - Packaging: 10 kg Bag
- Manufacturer: Saudi Markhor Industrial
Company
2. Scope of Work
- This method statement covers the procedure for the preparation and application
of cementitious tile grout in internal and external wall and floor tiling works.
3. Tools and Equipment
• Rubber grout float
• Clean mixing bucket
• Drill with mixing paddle
• Sponge and clean water
• Safety gloves and goggles
• Measuring tools
4. Surface Preparation
- Ensure that tile adhesive is fully cured before grouting.
- Clean tile joints to remove dust, dirt, and loose particles.
- Joints must be dry and free from water or contaminants.
5. Mixing Instructions
- Pour clean water into a mixing bucket
- Slowly add tile grout while mixing with a paddle mixer. -
Mix for 3-5 minutes until a uniform, lump-free paste is achieved.
- Allow the mix to rest for 2-3 minutes
and then remix briefly before application.
6. Application Procedure
- Apply the grout using a rubber float, spreading diagonally across joints.
- Press the grout firmly into the joints to ensure full filling.
- Remove excess grout from the tile surface using the float.
- Allow grout to set slightly (approx. 10-15 minutes), then wipe the tiles with a damp sponge.
- After initial curing, clean the tile surface with a dry cloth to remove any grout haze
7. Curing and Protection
• Protect the grouted area from water, frost, and mechanical stress for at least 24 hours.
• Avoid walking over grouted floors until fully cured.
8. Health and Safety
• Wear gloves, mask, and goggles during mixing and application.
• Avoid inhalation of dust and contact with skin or eyes.
• Refer to the Material Safety Data Sheet (MSDS) for more detailed information.