Sat - Thu 9.00 AM - 6.00 PM
PVC 45 Degree Bend – 50 to 250 mm
PVC 45 Degree Bend – 50 to 250 mm
Durable Elbow Fittings for Water, Drainage & Industrial Pipelines in KSA & GCC
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | PVC 45 Degree Bend |
| Size Range | 50 mm – 250 mm |
| Material | High-quality uPVC |
| Connection Type | Solvent Weld / Push-fit |
| Pressure Rating | PN 10 / PN 16 depending on pipeline system |
| Temperature Range | −10°C to +60°C |
| Chemical Resistance | Acids, alkalis, salts, industrial chemicals |
| UV Resistance | Yes |
| Installation Type | Underground & above-ground applications |
| Compliance | ASTM, ISO, GCC, Saudi standards |
| Service Life | 30–50 years |
Application
Water Supply Systems
Ensures Smooth Flow Direction in Residential, Commercial, and Municipal Pipelines.
Drainage and Sewerage
To ensure water-tight connections in the water drainage and sewerage fields.
Industrial Piping
Ideally suited for use in chemical, petrochemical, and industrial processes on the basis of high resistance.
Irrigation Systems
Guides the water pipeline accurately for proper and even distribution in agriculture/landscaping applications.
Telecom & Electrical Conduits
Protects cables and ducts in underground constructions with a safe change in directions.
Infrastructure Projects
It has been used in highways, tunnels, metros, airport development, etc., to keep the pipeline aligned.
Installation Guide
1. Pipe Preparation
Ensure the pipe ends are clean, smooth, and free from debris.
2. Solvent Cement Application
Apply solvent cement to the pipe end and the internal socket of the bend.
3. Joining
Insert the pipe fully into the bend with slight twisting to spread the cement evenly.
4. Holding & Curing
Hold the joint for a few seconds and allow it to cure according to manufacturer recommendations.
5. Inspection
Verify proper alignment and secure bonding before pressurizing or backfilling.
Advantages & Benefits
- On smooth direction flows at 45-degree angles
- Reduces Pipeline Stress and Leakage
- Lightweight and easy to handle
- Chemical, Corrosion, and UV resistant
- Suitable for both underground and above-ground configurations
- Durable and Low-maintenance
- Compliant with standard PVC pipe systems.
- Long service life means cost efficiency
- Enhances flow efficiency and minimizes energy loss
- Safe and Reliable for Various Uses
Why PVC End Cap – 20 to 315 mm is Ideal for KSA & Gulf Regions
- High Temperature Resistance – Desert heat and high conditions- are withstood.
- UV Resistant: It retains its durability when subjected to intense sunlight.
- Chemical Resistant: Works under saline and industrial conditions
- Diverse Uses: It may be found in water service, drainage work, telecommunication installations, industries
- Compliance: Meets GCC, Saudi, and ISO requirements
Compatible Accessories
Solvent Cement & Primer: For strong, leak-proof joints
PVC Couplers, Tees, Reducers: For complex pipeline networks
Gaskets & Seals: Enhance joint sealing and performance
Pipe Clamps & Supports: Maintain alignment and stability
Maintenance and Lifecycle Advantages
- Low Maintenance: Minimal intervention required after installation
- Durability: Resistant to UV, chemicals, and mechanical stresses
- Long Service Life: 30–50 years depending on environmental conditions
- Easy to inspect: it may suffice to simply look.
- Cost-Effective: Reduces replacement and repair costs over time.
Sustainability & Compliance
- Eco-Friendly Material: The product uses uPVC which can be recycled
- Reduced Waste: The product's extended lifespan decreases the need for its replacement
- Energy-Efficient Manufacturing: The process reduces its greenhouse gas emissions through energy-saving techniques
- Compliance: The product meets all requirements established by ASTM ISO GCC and Saudi standards
Conclusion
The PVC 45 Degree Bend – 50 to 250 mm piping product provides an effective means for achieving smooth changes in direction within corresponding water network schemes within the water, drainage, industrial, irrigation, and telecom sectors. Its uPVC material provides superior chemical resistance for the aggressive environment of the KSA and Gulf regions.
Easy installation, minimal maintenance, and a long lifecycle of 30 to 50 years make it a fitting that promises a long life of a leak-proof, efficient, and eco-friendly pipeline system. Their ability to work with multiple pipe systems and adhere to GCC and Saudi Arabia regulations, combined with their eco-friendly feature, make them a very intelligent choice.
Frequently Asked Questions (FAQs)
1. What is the purpose of a PVC 45-degree bend?
To facilitate smooth directional changes in pipelines while maintaining leak-proof connections.
2. What sizes are available?
Available in 50 mm to 250 mm to accommodate various pipe diameters.
3. How is the bend installed?
Using solvent cement or push-fit methods, ensuring proper alignment and bonding.
4. Can these bends be used underground?
Yes, suitable for both underground and above-ground installations.
5. What is the pressure rating?
Supports PN 10 and PN 16, depending on the piping system.
6. Are they resistant to chemicals?
Yes, they resist acids, alkalis, salts, and industrial chemicals.
7. Can they withstand high temperatures?
Yes, designed for the extreme heat in KSA and Gulf regions.
8. What standards do PVC 45-degree bends comply with?
ASTM, ISO, GCC, and Saudi municipal standards.
9. What is the lifespan of the product?
Typically 30–50 years, depending on environmental conditions.
10. Are PVC 45-degree bends eco-friendly?
Yes, made from recyclable uPVC and manufactured sustainably.