Sat - Thu 9.00 AM - 6.00 PM
HDPE PE100 Mini Duct Full Orange 20/16 mm
HDPE PE100 MINI-DUCT, FULL ORANGE, 20/16 MM
High-Performance Telecom Microduct for Fiber Optic Networks in KSA & GCC
Key Features
- Manufactured using the highest quality HDPE, which is, in other words, 100% PE100
- The diameter was optimized to 20/16 mm OD/ID expressly for micro-fiber cable
- The inner wall of the cable was already lubricated to improve the blowing of the cable
- Therefore, it can be used in outdoor and desert climates due to its sunlight and heat protection
- The cable has crush resistance that is suitable for underground installation
- The cable is easy to install, light, and flexible
- Orange color for telecom identification reasons
- Compatible with FTTx, FTTB, and FTTH networks
- The cable can resist chemicals, moisture, and corrosion
- The installation can be done using micro-trenching or direct burial methods without worrying about the cable getting damaged.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type | HDPE PE100 Mini-Duct |
| Color | Full Orange |
| Outer Diameter (OD) | 20 mm |
| Inner Diameter (ID) | 16 mm |
| Material | High-Density Polyethylene (PE100 Virgin) |
| Inner Surface | Silicon-coated, low friction |
| UV Resistance | Yes |
| Operating Temperature | -20°C to +60°C |
| Installation Methods | Blowing, pulling, micro-trenching, duct-in-duct |
| Standard Lengths | 500m, 1000m, 2000m drums (custom available) |
| Crush Resistance | High load-bearing |
| Compliance | ISO 11801, ITU standards, EN standards |
Applications of HDPE PE100 Mini-Duct 20/16 mm
The 20/16 mm mini-duct is used in a number of different sectors:
1. Telecom and Fiber Networks
- Fiber-to-the-Home (FTTH)
- Fiber-to-the-Building (FTTB)
- Fiber-to-the-Premises (FTTP)
- Metro fiber networks
- Backbone telecom infrastructure
2. Micro-Trench Networks
The application was meant for very narrow trench installations that were needed because of urban telecom expansion.
3. Duct-in-Duct Installations
This enables the placement of multiple micro-ducts inside a larger HDPE pipe.
4. Smart City Infrastructure
IoT backbone, CCTV and surveillance cables, and traffic management systems are some of the fields where the technology is being applied.
5. Oil & Gas Field Communication Lines
The technology is regarded as the fiber deployment method that is protected even in severe and hard-to-reach conditions.
Benefits of Using HDPE PE100 Mini-Duct 20/16 mm
Perfect for Middle East Climate
UV-stabilized HDPE ensures long-term durability even under extreme 45–55°C temperatures typical in GCC.
Efficient Cable Installation
Low friction inner surface enables cable blowing over long distances, saving time and cost.
Enhanced Mechanical Strength
The duct withstands:
soil pressure
road crossing loads
underground stresses
Cost-Effective
Ideal balance of price, durability, and performance, making it a favorite among Gulf contractors.
Corrosion & Chemical Resistance
Suitable for desert, coastal, and industrial zones.
How It Is Used (Step-by-Step)
1. Planning & Marking
The engineers will first select the routes for laying the fiber optics to the home or main lines.
2. Trenching or Micro-Trenching
The micro trench measures 20–40 mm in width.
Slot-cutting machines are used for quick and efficient installations.
3. Duct Laying
The mini-duct is inserted in the trenches and is connected using duct couplers.
4. Backfilling & Surface Restoring
The trench is filled, and the ground is restored.
5. Cable Blowing or Pulling
The optical fiber cable is either blown or pulled by pneumatic machines.
Industries That Use This Product
Telecom & Internet service providers
Fiber optic cable contractors
Government infrastructure projects
Smart city developers
Oil & gas communication networks
Utility companies
Industrial and commercial telecom installations
Why It Is Popular in KSA & Gulf
Withstands high heat, sand, moisture, and UV radiation
Very low maintenance
Works perfectly for Etisalat, STC, Mobily, Du, Ooredoo, Zain
Reliable for modern telecom systems
High-speed network compatibility (up to 10G/40G/100G)
Conclusion
The PE100 HDPE Mini-Duct Full Orange 20/16 mm is the best choice for fiber optic network installation in KSA and other Gulf regions. It is a premium, durable, and eco-friendly solution. The advanced material strength, UV resistance, and low-friction duct are among the next-generation features of this mini-duct that have not only won the favour of telecom operators and contractors but also government infrastructure developers expecting durable, efficient, and economical installations.
Besides promoting the rapid deployment of fibers, this mini-duct reduces the difficulties of installation, and provides excellent protection, thus making the network’s performance reliable for a long time.
Frequently Asked Questions (FAQ)
1. What is HDPE PE100 Mini-Duct 20/16 mm?
HDPE PE100 Mini-Duct 20/16 mm is a high-density polyethylene micro-duct with a 20 mm outer diameter and 16 mm inner diameter. It is used for fiber optic cable blowing, telecom networks, and FTTH installations in KSA and the Gulf region.
2. What is the purpose of the Full Orange color?
The full orange color is an industry-standard identification for telecommunication ducts, helping technicians easily distinguish telecom infrastructure during installation, maintenance, and excavation.
3. Is the 20/16 mm mini-duct suitable for Saudi Arabia’s climate?
Yes. It is UV-stabilized, heat-resistant, and built with PE100 material, making it ideal for extremely hot and dry climates found in KSA and GCC countries.
4. Does this mini-duct support long-distance cable blowing?
Absolutely. The duct features a low-friction silicon-coated inner layer, which enables smooth and efficient blowing of fiber optic cables over long distances with minimal resistance.
5. What applications are common for 20/16 mm micro-ducts?
It is used in:
FTTH & FTTx networks
Backbone fiber networks
Smart city infrastructure
Micro-trenching projects
Oil & gas communication lines
6. Can this duct be installed using micro-trenching methods?
Yes. The 20/16 mm duct is specifically designed for micro-trenching, allowing narrow trench widths and fast deployment in urban areas.
7. Is the duct corrosion and chemical-resistant?
Yes. PE100 material provides excellent resistance to chemicals, moisture, and soil corrosion, making it suitable for harsh environments.
8. What lengths are available for the HDPE mini-duct?
Standard lengths include 500m, 1000m, and 2000m coils, with custom lengths available based on project requirements.
9. What fiber optic cables are compatible with the 20/16 mm mini-duct?
It supports a range of micro-fiber cables typically used for FTTH, FTTB, and metro networks, depending on cable diameter and blowing specifications.
10. Can the duct be used in duct-in-duct installations?
Yes. It can be installed inside larger HDPE ducts (32 mm, 40 mm, 50 mm, etc.), allowing multiple microducts within a single conduit.
HDPE PE100 Mini Duct 20/16mm Orange-Premium Supplier, Manufacturing & Project Delivery
HDPE PE100 Mini Duct 20/16mm in Orange is provided through approved manufacturers to support FTTx telecommunications systems, and underground fiber infrastructure projects throughout the Kingdom of Saudi Arabia and the Gulf Cooperation Council countries. The HDPE PE100 Mini Duct 20/16mm is manufactured from PE100 grade high-density polyethylene (HDPE), which provides greater flexibility and crush resistance than traditional ducting materials. The mini duct also provides long-lasting protection for fiber optic cables installed within the HDPE mini duct.
EPC contractors, telecommunications operators and infrastructure developers can benefit from the following:
✔ Bulk supply of project materials
✔ Documentation confirming PE100 grade compliance
✔ Support during the installation of fiber opti;c networks
✔ Quick delivery within the KSA & GCC
✔ Direct contact with the manufacturer.
HDPE PE100 Mini Duct vs PVC Conduit — Technical Comparison& Industry Best Practices
HDPE PE100 Mini Duct vs PVC Conduit — Technical Comparison
| Feature | HDPE PE100 Mini Duct (20/16mm) | PVC Electrical Conduit |
|---|---|---|
| Material Grade | PE100 High-Density Polyethylene | Unplasticized PVC |
| Flexibility | High flexibility for micro-trenching & HDD | Rigid structure |
| Fiber Blowing Compatibility | Excellent — designed for fiber optic cable blowing | Limited suitability |
| Impact Resistance | Very high impact resistance | Moderate |
| Installation Method | Suitable for trenchless and complex routing | Best for straight conduit runs |
| Underground Performance | Superior long-term durability | Good but less flexible under stress |
| Moisture Resistance | Excellent sealed network performance | Good but joint sealing required |
| Weight | Lightweight and easy handling | Heavier than mini duct |
| Bend Radius | Small bend radius capability | Limited bending ability |
| Typical Applications | FTTx networks, telecom ducts, fiber infrastructure | Electrical cable protection |
| Service Life | 50+ years (under standard conditions) | 25–40 years depending on load |
Best Practices for Mini Duct Fiber Installation
-Utilize PE100-rated ducts when blowing cables at high-pressure
-Ensure the bend radius is maintained during the installation of fiber cables as protection against damage
-Make sure the connections are double-sealed to avoid moisture entering the system
-Comply with all applicable telecommunication infrastructure codes and standards
-Use color-coded ducts to identify networks.
The guidelines stated above help build durable networks, improve efficiency in installing the systems, and increase fibre performance over the lifetime of the network.