Sat - Thu 9.00 AM - 6.00 PM
Send Inquiry

Microduct 3 way 28/24mm

Saudi Ducts > Microduct 3 way 28/24mm

Microduct 3 Way 28/24 mm

Durable HDPE Fiber Duct for FTTx, 5G & Telecom Networks in KSA & Gulf

The Microduct 3 Way 28/24 mm is a microduct system of high density and high performance that is intended for modern fiber-optic networks, such as FTTx, FTTH, and 5G infrastructures. HDPE PE100 material is used in its construction, which offers outstanding durability, flexibility, and reliability over a long period of time. Thus, it is perfectly suitable for telecom reporting in KSA and Gulf region especially due to its high-density nature.

In a way, the operators can run the fiber cables in the single pathway due to the triple-duct configuration resulting in lower civil work costs, faster deployment timelines, and allowing future network expansion to be done seamlessly. Moreover, the inner bore of the duct is so smooth that it allows the efficient installation of air-blown fiber which in turn supports the fiber runs being of long distance and also minimizing the friction.

The Microduct 3 Way 28/24 mm can be installed in direct-burial trenches, duct-in-duct systems, micro-trenching, or aerial installations, it is specially designed to survive the hard desert climate, UV light, and very high temperatures which are usually the case in GCC countries.

The Microduct 3 Way 28/24 mm combines three individual HDPE microducts into a single compact unit. Each microduct has an outer diameter of 28 mm and an inner diameter of 24 mm, optimized for modern micro-cables and air-blown fiber systems.

Designed for both underground and aerial installations, it withstands extreme environmental conditions typical of Gulf deserts, including high temperatures, UV radiation, and shifting soils. The smooth interior minimizes friction during fiber blowing, allowing cables to travel long distances with minimal labor.

This microduct system is suitable for telecom operators, EPC contractors, utility companies, and smart-city developers, providing a scalable, long-term solution for fiber-optic network expansion in KSA and the Gulf region.

The Microduct 3 Way 28/24 mm is a microduct system of high density and high performance that is intended for modern fiber-optic networks, such as FTTx, FTTH, and 5G infrastructures. HDPE PE100 material is used in its construction, which offers outstanding durability, flexibility, and reliability over a long period of time. Thus, it is perfectly suitable for telecom reporting in KSA and Gulf region especially due to its high-density nature.

In a way, the operators can run the fiber cables in the single pathway due to the triple-duct configuration resulting in lower civil work costs, faster deployment timelines, and allowing future network expansion to be done seamlessly. Moreover, the inner bore of the duct is so smooth that it allows the efficient installation of air-blown fiber which in turn supports the fiber runs being of long distance and also minimizing the friction.

The Microduct 3 Way 28/24 mm can be installed in direct-burial trenches, duct-in-duct systems, micro-trenching, or aerial installations, it is specially designed to survive the hard desert climate, UV light, and very high temperatures which are usually the case in GCC countries.

The Microduct 3 Way 28/24 mm combines three individual HDPE microducts into a single compact unit. Each microduct has an outer diameter of 28 mm and an inner diameter of 24 mm, optimized for modern micro-cables and air-blown fiber systems.

Designed for both underground and aerial installations, it withstands extreme environmental conditions typical of Gulf deserts, including high temperatures, UV radiation, and shifting soils. The smooth interior minimizes friction during fiber blowing, allowing cables to travel long distances with minimal labor.

This microduct system is suitable for telecom operators, EPC contractors, utility companies, and smart-city developers, providing a scalable, long-term solution for fiber-optic network expansion in KSA and the Gulf region.

Explore Full Product Details
image

Key Features

  • Triple Duct Configuration - there can be several fiber lines in one path.
  • HDPE PE100 Material - this material gives strength, durability, and long-term reliability.
  • Low-Friction Inner Layer - transferring fibers over long distances is easy and requires very little effort because there is no friction.
  • UV & Temperature Resistant - the cable is highly suited for the severe weather conditions of the Gulf.
  • Flexible Installation - dmH allows direct burial, duct-in-duct, micro-trenching, and aerial installations.
  • Scalable Design - it is possible to expand the network without additional excavation.
  • Standards Compliant - it is compliant with ITU-T, IEC, ISO, and BS EN specifications.

Technical Specifications

ParameterSpecification
Product NameMicroduct 3 Way 28/24 mm
MaterialHDPE PE100
Number of Ducts3
Outer Diameter28 mm
Inner Diameter24 mm
ShapeRound, Triple Duct Bundle
Inner CoatingLow-friction layer for fiber blowing
Operating Temperature-20°C to +80°C
UV ProtectionYes
InstallationDirect Burial, Micro-Trenching, Duct-in-Duct, Aerial
Expected Lifespan50+ years
PackagingCoils/Reels, 500–1000 m per reel
StandardsITU-T, IEC, ISO, BS EN, GCC Telecom Norms

 

Applications

The Microduct 3 Way 28/24 mm is ideal for multiple GCC telecom and data projects:

  1. FTTx Networks – High-density fiber deployment for residential and commercial areas.

  2. 5G Small Cell & Macro Backhaul – Supports base stations and data backhaul connections.

  3. Smart City Infrastructure – Backbone for IoT sensors, CCTV, traffic systems, and utilities.

  4. Industrial Fiber Networks – Oil & gas, petrochemical plants, and manufacturing facilities.

  5. Data Centers & Enterprise Networks – Reliable fiber pathways for high-speed connectivity.

  6. Urban & Rural Deployments – Micro-trenching, duct-in-duct, or aerial installations.

Installation Methods

  • Direct Burial - Ducts are placed in trenches on suitable bedding and with protection to prevent damage.
  • Duct-in-Duct - Existing conduits are used for future network expansion.
  • Micro-Trenching - This is the shallow laying of optical fibers along streets, pavements, or city corridors.
  • Horizontal Directional Drilling (HDD) - It is a solution for road, bridge, or very busy area crossings that are difficult to reach.
  • Aerial Deployment - It refers to the installation of the cable on poles, which is common in rural or temporary systems.
  • Installation Tips:
  • Avoid applying sharp bends over the manufacturer's specified radius.
  • Smoothest fiber blowing possible is ensured with the use of proper reels and feeding equipment.
  • Ensure that the ducts are aligned and not under tension prior to the cable installation.
  • Let maintenance and future expansion areas be visible.

Advantages

  1. High Density – Three ducts in one pathway for multiple cables.

  2. Cost-Efficient – Reduces trenching, labor, and civil works.

  3. Long-Distance Blowing – Low-friction inner surface enables efficient fiber deployment.

  4. Durable & Reliable – PE100 construction withstands GCC desert heat, UV, and soil pressure.

  5. Future-Proof – Network expansion is possible without additional excavation.

  6. Flexible Deployment – Suitable for urban, rural, industrial, and aerial applications.

  7. Standards Compliant – Meets ITU-T, IEC, ISO, BS EN, and regional telecom standards.

Benefits for GCC Telecom Operators

  1. Heat Resistant - Working still at an efficient rate of more than 50°C.
  2. UV Resistant - Best solution for the places with the greatest exposure of light for the whole installation period.
  3. Maintenance Costs Reduced - Quality HDPE material guarantees a long life.
  4. Supports Smart City Projects - Reliable backing for IoT, traffic, and security systems.
  5. Allows Installations of Expanding Networks - Installing additional fiber cables no more digging required.

Comparison with Other Microducts

FeatureMicroduct 2 Way 12/08 mmMicroduct 3 Way 28/24 mmMicroduct 4 Way 25/20 mm
Number of Ducts234
Outer Diameter12 mm28 mm25 mm
Inner Diameter8 mm24 mm20 mm
Fiber CapacityMediumHighVery High
Installation TypesDirect, micro-trench, aerialDirect, duct-in-duct, aerialDirect, duct-in-duct, aerial
Ideal ForSmall FTTxMedium FTTx, 5GLarge-scale backbone networks

Conclusion

The Microduct 3 Way 28/24 mm is a sturdy, dependable, and future-proof microduct system that perfectly fits the telecom networks of KSA and the Gulf countries. Its three-duct design, the use of HDPE PE100 material, and the smooth inner surface are features that make it perfect for FTTx, FTTH, 5G, smart city, and even industrial fiber networks.

This microduct provides operators, EPC contractors, and developers with a durable, high-performance solution for the next-generation telecom infrastructure of the Gulf region, which is cost-effective installation, long-distance fiber blowing, and scalability for future expansion.

Frequently Asked Questions (FAQ)

Q1: What is Microduct 3 Way 28/24 mm used for?
A1: For FTTx, FTTH, 5G backhaul, industrial fiber, and smart city networks.

Q2: Can it withstand Gulf desert conditions?
A2: Yes, PE100 HDPE is heat, UV, and soil-pressure resistant.

Q3: How many fiber cables fit per duct?
A3: Each 24 mm inner duct can carry multiple micro-cables depending on cable size.

Q4: Is it suitable for air-blown fiber?
A4: Yes, smooth inner bore supports long-distance fiber blowing.

Q5: What installation methods are compatible?
A5: Direct burial, duct-in-duct, micro-trenching, HDD, and aerial.

Q6: What is its lifespan?
A6: Approximately 50 years.

Q7: Can it be installed indoors?
A7: Yes, for risers, conduit systems, and data centers.

Q8: Does it meet GCC telecom standards?
A8: Yes, ITU-T, IEC, ISO, BS EN, and regional GCC norms.

Q9: Is it flexible for urban deployment?
A9: Yes, suitable for tight bends in micro-trenching or conduit runs.

Q10: How is it delivered?
A10: Coils/reels of 500–1000 meters depending on project requirements.

Microduct 3‑Way 28/24 mm- Premium Supplier & Delivery Credentials

The Microduct 3-Way 28/24 mm is a first-rate telecom infrastructure micro duct designed for the construction of FTTx, backbone fibre networks, and OSP in Saudi Arabia and GCC countries. Saudi Ducts connects EPC Contractor (Class A) companies, telecom operators, and utilities with certified producers and suppliers for fast delivery and technical support.

Key Features:

- Manufactured from high-quality, polyethylene (PE) material for high levels of physical strength, durability, and flexibility

- 3-way design allows for the installation of multiple micro fibe cables at the same time

- Optimised dimensions for extremely high levels of airflow makes them suitable for air-blown fibre installations

- Each unit delivered complete with a full QC documentation and compliance certificate

- Highly reliable logistics and supply throughout Saudi Arabia and GCC Countries.

Microduct 3‑Way 28/24 mm- Technical Snippets & Best Practices

Microduct 28/24 mm vs Micro Duct 2-Way 12/0.8 mm

FeatureMicroduct 3-Way 28/24 mmMicro Duct 2-Way 12/0.8 mm
Cable Capacity3 micro cables per duct2 micro cables per duct
Use CaseMid-span feeder & multi-fiber distributionLast-mile FTTH & FTTx
FlexibilityModerate for longer runsVery flexible for tight bends
InstallationAir-blown fiber up to medium distancesShorter-range air-blown fiber

Best Practices for Installation:

  • Maintain minimum bend radius to avoid fiber stress

  • Clean ducts thoroughly before fiber deployment

  • Use route and color documentation for maintenance

  • Follow EPC and telecom PE100 microduct standards

People Also Search For